Hamid Marvi
Associate Professor, School for Engineering of Matter, Transport and Energy
Hamid Marvi is an associate professor of aerospace and mechanical engineering in the School for Engineering of Matter, Transport and Energy at Arizona State University. Previously, he was a postdoctoral fellow at Carnegie Mellon University (2014-2015) and at Georgia Institute of Technology (2013-2014). He received his doctorate in mechanical engineering from Georgia Tech in 2013. His work has been published in several scientific journals, such as Science and PNAS, and has received attention from popular media, such as New York Times, Los Angles Times, Washington Post and BBC. His research aims to study fundamental physics behind interactions of biological systems with their surrounding solid, granular and fluidic environments. Utilizing biological insights derived from these studies, he would like to develop bio-inspired robotic systems and programmable interfacial structures for search and rescue, exploratory and medical applications.
Spring 2026
Yuvan Senthil
Mechanical engineering
Low-Cost Open-Source Micro-Drone Platform
Designing a sub-$50 drone platform to enable accessible experimentation in robotics and control systems
Program: FURI
Fall 2026
Surya Erramilli
Computer science
Magnetic Control of a Ferrofluidic Microrobot in Flowing Fluid
I’m studying how to control tiny magnetic liquid robots in flowing fluids, paving the way for targeted medical treatments without surgery.
Program: FURI
Kamron Nazarov
Biomedical engineering
Continuous Axial Locomotion and Roll Stabilization for an External Pipe-Crawling Inspection Robot
A pipe-crawling robot that stays balanced will help operators find corrosion faster, without shutting down active pipelines.
Program: FURI
Aydin A Kabir
Engineering (electrical)
Design of a Sensorized Modular Suction Cup for Semiconductor Handling
Developing octopus-inspired suction cups could help robots handle delicate semiconductor materials more safely and reliably.
Program: FURI
Spring 2024
Prince Singh
Mechanical engineering
Design of Testbed for Testing of Screw-Propelled Vehicles in Granular Media and at Reduced Gravity
Improving snake-shaped robotics with granular media simulations opens new paths for exploration and rescue missions in challenging terrains.
Program: MORE
Fall 2023
Li He
Computer science
Magnetic Micro-Robots for Medical Applications
Designing and constructing magnetic robots capable of surgery, drug delivery, and various other medical procedures within the human body could improve medical diagnosis and treatment.
Program: FURI
Summer 2023
Li He
Computer science
Magnetic Micro-Robots for Medical Applications
Designing and constructing magnetic robots capable of surgery, drug delivery, and various other medical procedures within the human body could improve medical diagnosis and treatment.
Program: FURI
Spring 2023
Drake Tore McKissack Morris-Sjolund
Mechanical engineering
Design Optimization of a Lizard-Inspired Tube Inspection Robot
Improving the design of a robot meant to scan industrial power plant pipes through non-invasive methods will keep power generation reliable.
Program: FURI
Summer 2022
Robin Koshy Mathews
Engineering (robotics)
Use of Octopus Arm Muscle for Bioinspired Soft Robotic Arm
Studying the behavior of each muscle layer in an octopus's arm for specific types of complex manipulations when electrically stimulated will help develop bioinspired soft robotic arms.
Program: MORE
Spring 2022
James Thomas Ross
Computer science
Viability of Magnets and Robotics on Advanced Surgeries
Exploring the viability of magnets and robotics will help design techniques for minimally invasive surgeries.
Program: FURI
Fall 2021
Ben Bethke
Mechanical engineering
Characterization of Octopus Arms Using EMG Studies
Quantifying muscle response of soft bodies such as in octopuses will drive enhanced flexibility and adaptability in soft robots to accomplish complex tasks.
Program: FURI
Spring 2021
Nihar Dattaram Masurkar
Robotics and autonomous systems
Design of a Controller for a Lizard Inspired Tube Inspection Robot
Designing a force feedback controller for a Lizard Inspired Tube Inspection Robot will improve its mobility for inspection along boiler tubes.
Program: MORE
Summer 2020
Darwin P Mick
Mechanical engineering
SCARLESS Sample Return
The SCARLESS mobility platform is a rover design that uses helically grousered wheels and cold gas thrusters for small-body sample return.
Program: FURI
Spring 2020
Ben Bethke
Mechanical engineering
Active Self-Boring Robots that Enable Next Generation Dynamic Underground Wireless Sensing Networks
Optimizing self-boring robot design parameters decreases environmental impact and improves subterranean mobility for underground testing.
Program: FURI
Alex Petras
Mechanical engineering
Magnetic Needle Steering for Minimally Invasive Surgery
Studying magnetic needle steering for use in minimally invasive surgery will increase precision and control.
Program: MORE
Marcus Gambatese
Mechanical engineering
Basilisk Lizard Interactions with Fluid Environments
Studying the forces that a basilisk lizard exerts on the surface of the water will improve robots designed to traverse complex terrain.
Program: FURI
Dakota Edwards
Mechanical engineering
Needle Tracking System
Needle tracking will help improve targeted drug delivery by providing more accurate delivery and less recovery time for the patient.
Program: MORE
Teleah Hancer
Biomedical engineering
Functionality of Octopus Arm Muscles
Verifying the functionality of octopus arm muscles will advance soft robotics and motor control systems.
Program: FURI
Darwin P Mick
Mechanical engineering
RASCAL Lunar Mobility
Designing and constructing a prototype for a lunar rover will help facilitate human exploration on the moon.
Program: FURI
Fall 2019
Jalpesh Rajendra Bhadra
Mechanical engineering
Lizard Inspired Pipe Testing Robot
Designing a four-finger underactuated gripper will help a lizard-inspired robot to climb and inspect boiler pipes.
Program: MORE
Teleah Hancer
Biomedical engineering
Functionality of an Octopus Arm
Quantitative understanding of muscle fibers in an activated octopus arm will advance motor control systems of robotics.
Program: FURI
Alex Petras
Mechanical engineering
Magnetic Needle Steering for Minimally Invasive Surgery
Developing magnetic needle steering technology will help health care professionals perform precise, minimally invasive surgeries.
Program: MORE
Vijay Anand Senthilkumar
Mechanical engineering
Lizard Inspired Tube Inspection Robot
Developing a lizard-inspired robot to scan boiler tubes can lead to early detection of defects.
Program: MORE
Dakota Edwards
Mechanical engineering
Needle Tracking System
A more accurate method for tracking objects within the human body can lead to improved targeted drug delivery.
Program: MORE
Spring 2019
Sheldon Cummings
Biomedical engineering
Octopus Arm Muscles in Relation to Arm Use for Bioinspired Robotics
Studying the musculature of octopus arms will help design flexible soft tissue robotics for use in medicine.
Program: FURI
Teresa McBryan
Aerospace engineering
A Comparative Study of Simulations and Experimental Testing on Screw-Propelled Vehicle in a Lunar Simulant
Researching the use of screw-like wheels for rovers on other planets, moons or asteroids will help enable better space exploration.
Program: FURI
Marko M. Green
Aerospace engineering
Mobility of Screw Propelled Vehicles in BP-1
Studying how screw-propelled robots move on granular media will allow us to build more sophisticated space robots in the future.
Program: FURI
Alex Petras
Mechanical engineering
Magnetic Needle Steering for Minimally Invasive Surgery
Designing a magnetic needle steering and tracking system will help advance minimally invasive surgery using robotics.
Program: FURI
Christian M Sclafani
Aerospace engineering
A Friction/Adhesion Characterization Setup for Bio-Inspired Robotic Applications
Improving the friction and adhesion properties of grippers used in robotics will expand their inspection capabilities in hazardous environments.
Program: FURI
Andrew Sweeney
Mechanical engineering
Force Measurement of Basilisk Lizard Running on Water
Characterizing the force interactions of basilisk lizards will assist in the development of robots that can run on water.
Program: MORE
Vijay Anand Senthilkumar
Mechanical engineering
Lizard Inspired Tube Inspection Robot
Developing a lizard-inspired robot to examine the harsh environment of boiler tubes will help detect defects at an earlier stage.
Program: MORE
Fall 2018
Sheldon Cummings
Biomedical engineering
How an Octopus Arm Can Outperform a Surgeon
Program: FURI
Clayton Brenner
Mechanical engineering
Characterizing Basilisk Lizard Running On Water
Program: FURI
Teresa McBryan
Aerospace engineering
Spring 2018
Hailey Burch
Mechanical engineering
Gait Optimization for Bio-Inspired Robotics
Program: FURI
Anna Hu
Mechanical engineering
Adhesion of Octopus Bimaculoides
Program: FURI
Needs Review
Surya Erramilli
Computer science
Magnetic Control of a Ferrofluidic Microrobot in Flowing Fluid
I’m studying how to control tiny magnetic liquid robots in flowing fluids, paving the way for targeted medical treatments without surgery.
Program: FURI
Kamron Nazarov
Biomedical engineering
Continuous Axial Locomotion and Roll Stabilization for an External Pipe-Crawling Inspection Robot
A pipe-crawling robot that stays balanced will help operators find corrosion faster, without shutting down active pipelines.
Program: FURI
Aydin A Kabir
Engineering (electrical)
Design of a Sensorized Modular Suction Cup for Semiconductor Handling
Developing octopus-inspired suction cups could help robots handle delicate semiconductor materials more safely and reliably.
Program: FURI